By Kamal K. Kar, Jitendra K. Pandey, Sravendra Rana
Volume B varieties one quantity of a guide approximately Polymer Nanocomposites. quantity B offers with Carbon nanotube established polymer composites. The training, structure, characterisation, houses and alertness of polymer nanocomposites are mentioned inside of a few 25 chapters. each one bankruptcy has been authored through specialists within the respective field.
Read or Download Handbook of Polymer Nanocomposites. Processing, Performance and Application: Volume B: Carbon Nanotube Based Polymer Composites PDF
Best polymers & textiles books
Electroactive Polymers for Robotic Application: Artificial Muscles and Sensors
Electroactive polymers (EAPs) reply to electric stimulation with huge deformations. they're dynamic actuators that have attracted realization from an interdisciplinary viewers of engineers and scientists. An permitting EAP know-how is rising which makes an attempt to mimic the houses of ordinary muscle and which, accordingly, can practice a different functionality in various biologically-inspired robotics purposes.
Self-Organized Surfactant Structures
Highlighting fresh advancements in addition to destiny demanding situations, this sequence of volumes covers such themes as emulsions, nano-emulsions, nano-dispersions and novel thoughts for his or her research. It additionally considers the elemental method in components equivalent to managed free up, drug supply and diverse purposes of nanotechnology.
Thermal Methods of Polymer Analysis
This ebook studies a number of the thermal equipment used for the characterisation of polymer homes and composition. most of these equipment research the houses of polymers as they modify with temperature. The equipment mentioned during this ebook are: differential photocalorimetry, differential scanning calorimetry, dielectric thermal research, differential thermal research, dynamic mechanical research, advanced gasoline research, fuel chromatography, fuel chromatography mixed with mass spectrometry, mass spectrometry, microthermal research, thermal volatilisation, thermogravimetric research and thermomechanical research.
Additional resources for Handbook of Polymer Nanocomposites. Processing, Performance and Application: Volume B: Carbon Nanotube Based Polymer Composites
Sample text
Demonstrated the oxidation of MWCNTs using HNO3. 18. The ID/IG values of the O-MWCNTs clearly exceeded those of the P-MWCNTs, because of the presence of carbon defect sites on the MWCNT walls [103]. 4 UV/O3-Treated CNTs (UV/O3–CNTs) A general procedure for the oxidation of P-CNTs using O3 is as follows: P-CNTs (1 g) were placed in a homemade vertical reactor. O3 (5 wt% in O2) was continuously passed through the reaction chamber at room temperature during the oxidation process. 5 to 6 h. For H2O-assisted ozonolysis, H2O and O3 were introduced into the reaction chamber simultaneously.
Karevan et al. [68] investigated the effect of filler content, presence of interphase, and agglomerates on the effective Young’s modulus of PP-based nanocomposites reinforced with CNTs. It was found that the interphase has an average width of $30 nm and modulus in the range of 5–12 GPa. 10 PS/CNT Composites A typical procedure for the preparation of a PS/CNT composite is as follows [69]: CNTs are dispersed in toluene using an ultrasonic wand dismembrator. The CNT suspensions are then admixed with toluene solutions of PS to yield PS/CNT solutions.
68] investigated the effect of filler content, presence of interphase, and agglomerates on the effective Young’s modulus of PP-based nanocomposites reinforced with CNTs. It was found that the interphase has an average width of $30 nm and modulus in the range of 5–12 GPa. 10 PS/CNT Composites A typical procedure for the preparation of a PS/CNT composite is as follows [69]: CNTs are dispersed in toluene using an ultrasonic wand dismembrator. The CNT suspensions are then admixed with toluene solutions of PS to yield PS/CNT solutions.