Blowing Agents and Foaming Processes 2010 Conference by Technology Smithersrapra Technology, Smithersrapra

By Technology Smithersrapra Technology, Smithersrapra Technology

Other than the industries with a protracted tested connection to polymeric foams, a turning out to be marketplace is being pushed by way of the present economic system. finish clients at the moment are sourcing cutting edge how one can preserve bills down, settling on new fabrics, assets and fabric possible choices. Foamed substrates frequently characterize least expensive possible choices with the twin advantages of saving fabric and shedding pounds - the latter minimising delivery and different similar charges. for this reason new functions were made commercially attainable through the continuing advancements within the mechanical functionality of foamed fabrics.

Show description

Read or Download Blowing Agents and Foaming Processes 2010 Conference Proceedings PDF

Best polymers & textiles books

Electroactive Polymers for Robotic Application: Artificial Muscles and Sensors

Electroactive polymers (EAPs) reply to electric stimulation with huge deformations. they're dynamic actuators that have attracted awareness from an interdisciplinary viewers of engineers and scientists. An permitting EAP expertise is rising which makes an attempt to mimic the homes of ordinary muscle and which, for that reason, can practice a special functionality in numerous biologically-inspired robotics functions.

Self-Organized Surfactant Structures

Highlighting contemporary advancements in addition to destiny demanding situations, this sequence of volumes covers such issues as emulsions, nano-emulsions, nano-dispersions and novel options for his or her research. It additionally considers the basic procedure in components resembling managed unlock, drug supply and diverse functions of nanotechnology.

Thermal Methods of Polymer Analysis

This e-book reports some of the thermal equipment used for the characterisation of polymer homes and composition. a majority of these tools learn the houses of polymers as they modify with temperature. The tools mentioned during this publication are: differential photocalorimetry, differential scanning calorimetry, dielectric thermal research, differential thermal research, dynamic mechanical research, advanced gasoline research, gasoline chromatography, gasoline chromatography mixed with mass spectrometry, mass spectrometry, microthermal research, thermal volatilisation, thermogravimetric research and thermomechanical research.

Additional info for Blowing Agents and Foaming Processes 2010 Conference Proceedings

Sample text

The possibility of very rapid curing of heterogeneous materials and the formation of unique structure has been presented by many workers. Radiation processing, including microwave heating, is an economical and applicable method of physical and chemical modification of polymeric materials. Beneficial properties of composite materials have been obtained, especially for such polymers [1]. The electric field component of microwave radiation is responsible for dielectric heating mechanisms because it can cause molecular motion by either migration of ionic species or rotation of dipolar species.

In this work, definition of the critical state will be revisited, occurrence of supercritical foaming documented, and paths of investigation proposed. INTRODUCTION A lot of attention has been paid in the last two decades to the use of supercritical fluids (SCF) for foaming thermoplastics. The supercritical state is usually defined as a fluid being held at a pressure and temperature above its critical parameters, Tc and Pc. Under such conditions, the fluid exhibits particular properties such as high compressibility, low viscosity and low surface tension, to name just a few...

J. Reignier, R. F. Champagne, Extrusion Foaming of Poly(Lactic Acid) Blown with CO 2 : Toward 100% Green Material, Proceedings of RAPRA’s Blowing Agents and Foaming Processes 2006, Paper 8 (2006). xvi . J. Tatibouët and R. Gendron, Nucleation in Foams as Assessed by In-line Ultrasonic Measurements, Antec 2004 (2004). Paper 4 Page 10 of 10 pages Blowing Agents and Foaming Processes 2010 19-20 May 2010 – Cologne, Germany FURTHER DEVELOPMENT OF LOW GWP FOAM EXPANSION AGENT WITH IMPROVED INSULATING PERFORMANCE VS.

Download PDF sample

Rated 4.05 of 5 – based on 26 votes